DutyDeskDutyDeskU.S. tariff desk · HTSUS Rev.21 · updated 2026-10-27
HSHS classificationDutyDuty lookupInfoResources
中文中文
Duty lookup
Data: HTSUS Rev.21 · 2026-10-25.12PrivacyAI-generated suggestion based on HTSUS text, not legal advice. Final classification rests with CBP rulings or licensed advice; the importer of record is responsible for the entry.

U.S. import duty lookup

Enter a 10-digit HTS line, the country of origin and the entry date to see the base rate, 301 / 232 / 201 / 338 additional duties, AD/CVD deposits, PGA flags and other requirements, with a confirmed total and a maximum.

Don't know the U.S. import tariff code? Classify a product →

The entry date decides which measures apply; earliest 2026-09-15

Entry claims (optional)
MPF and HMF amounts need the entered value and the transport mode.
Examples:Vacuum flasks / ChinaCotton T-shirts / Viet NamEV lithium batteries / KoreaAluminum profiles / MalaysiaPassenger car / JapanSteel plate / CanadaWhisky / CanadaCoffee / BrazilQuartz countertops / China
8427.20.8020
Aerial work platforms of a kind described in statistical note 5 to this chapter
Fork-lift trucks; other works trucks fitted with lifting or handling equipment: › Other self-propelled trucks: › Other
Origin
CN · China
Entry date
2026-10-27
Unit
No.
Column 1 general
Free
Column 2
35%
SPI
—
HTS revision
2026 Rev.21
Print page
2776
Confirmed ad valorem total
25%
Column 1 general rate Free + additional 25%
Maximum (conditional + AD/CVD deposits)
228.12%
conditional +25% · AD/CVD deposits +178.12%
AD/CVD cases
2
AD 165.14% + CVD 12.98%(Same investigation)
How this was calculated
The 232 derivative duty and the forced-labor 301 duty are alternatives (entering under the 232 heading exempts the forced-labor 301; entries under 9903.82.03 do not). The maximum counts the higher of the two (232 25% / forced-labor 301 12.5%), not both. The maximum exposure includes AD/CVD cash deposits AD 165.14% (A570139) + CVD 12.98% (C570140). AD and CVD from the same investigation are added together. The all-others rate is shown; the actual rate follows the exporter or producer and each order's scope, and deposits are not final duties.

What to verify next

5Checks derived from this result; each item restates a measure, case or regulatory hit shown below.
  1. 1.AD/CVDAD/CVD: confirm whether the producer / exporter has its own rate and whether the goods fall within the scope of "A570139 / C570140" (cases A570139 / C570140)↗
  2. 2.RegulatorySection 232 melt-and-pour / smelt-and-cast reporting: Steel: report the melt-and-pour country ISO code in the ACE Importer's Additional Declaration Type 08 (since 2024-11-21) and upload the mil…↗
  3. 3.RegulatoryFCC Covered List: By product category (restricted when produced abroad; check the exemption conditions)↗
  4. 4.ConditionalSection 301 forced-labor tariff (12.5%): decide whether the conditions are met and keep the supporting documents
  5. 5.Conditional232 steel / aluminum / copper & derivatives: decide whether the conditions are met and keep the supporting documents

Base rate

Column 1 / Column 2 / SPIFree
Column 1 General (MFN)Applies
Free
Basis: HTSUS 2026 Rev.21 chapters 1–97Verification: VERIFIED

Section 301 forced labor

1+12.5%
Section 301 forced-labor tariff (12.5%)9903.05.31Conditional
+12.5%

China: Column 1 rate + 12.5% additional

  • If entered under a 232 heading listed in note 52(f) (METALS), this duty is exempt (9903.05.90); entries under 9903.82.03 (metal content <15%) are not exempt
  • General exemptions by nature of the transaction (independent of the HTS line): humanitarian donations 9903.05.91 and informational materials (publications, films, recordings, artworks etc.) 9903.05.92 are exempt — tick "humanitarian donation" under entry claims to apply it
Basis: HTSUS Ch.99 U.S. note 52; 91 FR 47318Effective: 2026-07-24CSMS / source: CSMS #69326983Verification: VERIFIED

Section 301 China

1+25%
China 301 List 1 (9903.88.01)9903.88.01Applies
+25%

8-digit subheading 8427.20.80 is on L1

Basis: HTSUS Ch.99 note 20Effective: 2018-07-06Verification: VERIFIED

Section 232

1+25%
232 steel / aluminum / copper & derivatives9903.82.09Conditional
+25%

General (all other countries) | Self-propelled works trucks not powered by an electric motor, fitted with lifting and handling equipment, nesoi

  • Chapter 84 / 85 / 87 parts may be entered by end use (which must be substantiated): motorcycle manufacturing in the U.S. 9903.82.13 (0%); agricultural / fixed or mobile industrial equipment manufacturing 9903.82.23–.26 (Column 1 + 232 = 10% or 15% total; not for Column 2 countries; until 2027-12-31)
  • Derivative: 232 applies only if the steel / aluminum / copper content is ≥15% by weight; below 15% enter under 9903.82.03 (0%), which is not a note 52(f) heading and so does not exempt the forced-labor 301 duty
  • The country of melt-and-pour (steel) / smelt-and-cast (aluminum) must be reported (note 16(d)/(i))
U.S.-melted / smelted-and-cast content ≥85%: 10% (note 16(e)) → 10% · 9903.82.06Motorcycle parts for use in manufacturing motorcycles in the U.S.: 0% (note 16(g)) → 0% · 9903.82.13Parts used exclusively in manufacturing agricultural, fixed or mobile industrial equipment: Column 1 + 232 = 15% total (note 16(k)/(f), until 2027-12-31) → 15% · 9903.82.25Same, with ≥85% U.S.-melted / smelted-and-cast content: 10% total (note 16(k)/(e)) → 10% · 9903.82.23Metal content <15% by weight: 0% (9903.82.03; the forced-labor 301 exemption is then not available) → 0% · 9903.82.03Aluminum articles containing Russian smelted or cast primary aluminum (any origin): 200% → 200% · 9903.85.67 / .68
Basis: Proclamation 11021 (2026-04-02) 91 FR 18201; Proclamation 11032 (2026-06-01) 91 FR 34085; Proclamation 11045 (2026-07-20) 91 FR 46635Effective: 2026-06-08Expires / changes: 2027-12-31; from 2028-01-01 merged back into Annex I-B (c)(vii) at 25% (9903.82.09)CSMS / source: CSMS 68253075 (2026-04-03); 68554727 (2026-05-06); 68855869 (2026-06-05); 69252300 (2026-07-15); 69711865 (2026-08-31)Verification: VERIFIED

AD/CVD

1
AD/CVD: 2 orders in placeConditional
—

Cash deposits follow the company-specific rate (ACE case module). Coverage depends on each order's scope. The table below lists case numbers, status and the all-others rate. The all-others deposit rate is counted in the maximum exposure, not in the confirmed total.

Basis: ACE REF-202/207/208 (2026-09-11); FR noticesVerification: VERIFIED (case existence) / check scope and rates case by case
CaseTypeProductStatusAll-others rateDeposit statusDetermination
Same investigation: A570139 / C570140 · AD 165.14% + CVD 12.98% = 178.12% counted in the maximum
A570139
Matched on 8427.20.8020
AD
Certain Mobile Access Equipment and Subassemblies Thereof
Order in place165.14%Deposits in effect
91 FR 16631 (2026-04-02) review opportunity
ACE rate eff. 2022-02-22
C570140
Matched on 8427.20.8020
CVD
Certain Mobile Access Equipment and Subassemblies Thereof
Order in place12.98%Deposits in effect
90 FR 56719 (2025-12-08) review opportunity
ACE rate eff. 2021-12-09

PGA filing flags

EPA EP3ExpandCollapse
EPA EP3
  • EP3 Vehicle and Engines specific data may be required

may-be-required only · ACE valid to 2039-12-31

Fees

MPF 0.3464% · HMF 0.125%ExpandCollapse

no entered value: rates and limits only

MPF 0.3464% (min $34.58 / max $670.86)—
HMF 0.125% (ocean only)not ocean

Period 2026-10-01 – 2027-09-30 · 91 FR 48398 (2026-07-31, Doc. 2026-15530, FY2027)

Other import requirements

2

Supply chain / forced labor (UFLPA · WRO · CAATSA)

Chinese origin: the UFLPA presumption is triggered through the supply chain (Xinjiang inputs / Entity List), not by country of origin; the origins with the most CBP denials are MY / VN / TH.

Not in a UFLPA priority sector, and no WRO or Finding applies to this origin. The UFLPA presumption still applies through the supply chain (Xinjiang content or listed entities).

Requirements without an ACE flag

Section 232 melt-and-pour / smelt-and-cast reportingCBPApplies
at-entry

Steel: report the melt-and-pour country ISO code in the ACE Importer's Additional Declaration Type 08 (since 2024-11-21) and upload the mill certificate via DIS. Aluminum: smelt / cast country fields. The "unknown" option is charged at the higher rate.

2025–26: "Unknown" option available since 2025-06-28

Basis: Proc. 9704/9705 and successors; CSMS #62582900 / #65493457Scope: 232 metals (This line is on the 232 steel / aluminum / copper list)Exemptions: Not applicable to HTS codes outside Section 232CSMS / source: CSMS #62582900; #65493457Verification: H
EPA vehicle & engine declarationEPAInfo
at-entry

Submit Form 3520-1 (on-road vehicles / engines) or 3520-21 (non-road) through the PGA message set at entry, citing the EPA certificate of conformity / engine family

2025–26: Forms / disclaim templates revised 2025-02

Basis: 40 CFR 85 Subpart P; 40 CFR 1068.301Scope: EP3/EP4 (ACE flag present — see the PGA panel)Exemptions: Electric vehicles without an internal-combustion engine may disclaim with code ACSMS / source: EPA importing vehicles and enginesVerification: M
FCC Covered List (47 CFR 1.50002 / 2.903) · hits 1 · rules 0
CL-2026-04 · Foreign-produced advanced robotic devices (mobile ground robots incl. autonomous mobile robots, humanoids, quadrupeds), except those granted Conditional Approval by DoW8427Conditional
added 2026-07-28

No new FCC equipment authorization for foreign-produced advanced robotic devices since 2026-07-28 (47 CFR 2.903) — every Wi-Fi/Bluetooth/cellular-connected mobile robot is an RF device needing certification, so new models cannot be authorized or imported. Conditional Approval: DoW only; applications close 2028-01-01; require BOM, ownership (≥5% beneficial owners), country of origin of design/software, and quantified U.S. onshoring plan with quarterly reports. | By product category (restricted when produced abroad; check the exemption conditions)

Exemptions: Buy American domestic end product (48 CFR 25.101(a), >65%/75% domestic component cost); listed exclusions (connected vehicles, rail, UAS, UUVs, FDA medical devices, fixed industrial/medical robots); devices ≤4.4 lbs or without ≥200 kbps connectivity; DoW Conditional Approval; previously authorized models; federal government use.

Equipment: Verbatim entry: "Foreign-produced advanced robotic devices, except advanced robotic devices which have been granted a Conditional Approval by DoW." Definition (NSD 2026-07-27, as summarized by Wiley/Skadden/Sidley [S] — verbatim appendix TBD_): a mechanical device, including autonomous mobile robots, humanoid robots and quadrupeds, that (1) is capable of locomotion, obstacle avoidance, navigation or movement on the ground; (2) operates at a distance from a human operator/supervisor based on commands or in response to sensor data; (3) weighs more than 4.4 lbs (incl. docking station); and (4) contains an environmental sensor, a network-connectivity component (≥200 kbps) and software controlling autonomous navigation/movement or remote command-and-control (incl. AI/ML weights [S]). Exclusions: connected vehicles (15 CFR 791.301); rail-only vehicles; UAS (47 CFR 88.5); unmanned underwater vehicles; FDA-regulated medical devices (21 U.S.C. 360c) incl. surgical robots, prostheses, mobility-assistive devices; fixed/stationary industrial or medical robots (SCARA, articulating, Cartesian, delta arms). "Foreign-produced" = not a "domestic end product" under 48 CFR 25.101(a). Consumer robots >4.4 lbs with Wi-Fi/LiDAR (robot vacuums, robotic lawn mowers, pool robots, delivery robots) fall within the literal definition — product-specific analysis required [S].Existing authorizations: Previously authorized models remain valid unless later revoked/limited (not within DA 26-635); may continue to be imported/sold; hardware permissive changes prohibited; software/firmware Class I & II changes waived by DA 26-789 through 2029-01-01.CSMS / source: DA 26-786 (2026-07-28; NSD 2026-07-27); DA 26-789 (2026-07-28); DOC-423682A1 (2026-07-28); FCC FAQ page fcc.gov/covered-list-faqs-robots-inverters (inaccessible to fetch — 403)
General requirements (all goods) (4)
  • Country-of-origin marking (CBP, 19 U.S.C. 1304; 19 CFR 134): Mark the country of origin legibly and permanently in English before release. J-list articles (§134.33) may be marked on the container. Special methods (§134.43: knives, scissors, surgical / scientific instruments, pliers and vacuum bottles must be die-stamped, etched or engraved). Pipe 7304–7307, gas cylinders 7311 and manhole covers 7325 under 1304(c)–(e). Watches and clocks per chapter 91 additional U.S. note 4. Hong Kong goods marked "China" (EO 13936; the origin code stays HK). eCFR 19 CFR 134; CBP HK FAQ
  • Wood packaging material (ISPM 15) (APHIS/CBP, 7 CFR 319.40-3): Wood pallets / crates for all goods must be heat-treated or fumigated and bear the IPPC mark; otherwise immediate re-export and penalties eCFR 7 CFR 319.40-3
  • Importer Security Filing (10+2) (CBP, 19 CFR 149): File the 10 data elements 24 hours before vessel loading (5 elements for FROB / IE / T&E); violations: $5,000 liquidated damages per shipment eCFR 19 CFR 149
  • FTC Made in USA Labeling Rule (FTC, 16 CFR 323): Unqualified "Made in USA" claims only when all or virtually all of the product is made in the U.S.; civil penalties FTC rule; EO 14392

PGA flags: what to prepare

EPA · VNE EP3/EP4 — Motor vehicles, motorcycles, non-road engines / equipment

Before arrival: EPA certificate of conformity (engine family / test group) or ICI / exemption; determine the 3520-1 / 3520-21 declaration code

At entry: EPA / VNE message set (electronic 3520-1 / 3520-21): declaration code, engine family / test group LPCO, VIN / engine number, party roles

Disclaim: EP3: A (no engine / electric), B (OEM certificate holder), C, D; EP4 cannot be disclaimed

If missing: Entry rejected / refusal; CAA penalties

2025–26: Forms / disclaim templates revised 2025-02

https://www.epa.gov/importing-vehicles-and-engines · Verification M

Stacking rules that apply here 18ExpandCollapse
ABRelationRuleBasis
FL301BASEstackAdditive to Column 1; EU/TW net-of-MFN to 10%, JP/KR/CH to 12.5%HTSUS Rev.21 note 52(a), 52(k)
FL301CN301stackStacks with China 301note 52(a)
FL301S232exempt_bGoods entered under the listed 232 headings are exempt from FL-301 (9903.05.90); UAS 232 and polysilicon 232 are not in note 52(f) → FL-301 still applies (TBD_)note 52(f)(1)–(8); Sec232_Carveout table
FL301ADCVDstackAD/CVD continue to applynote 52(a)
FL301FTAnotePreference claims do not exempt, except USMCA duty-free (9903.05.93/.94) and CAFTA-DR textiles (9903.05.95)note 52(a), (g)–(i)
FL301CH98noteChapter 98 exempt except 9802.00.40/.50/.60 (value of repairs) and 9802.00.80 (value less U.S. content)note 52(a)
CN301BASEstackAdditive to Column 1note 20(a)/(c)/(e)/(g)/(r); note 31(a)
CN301S232stackStacks: neither 301 nor 232 exempts the other for Chinanote 20 / 31; the 232 proclamations
CN301ADCVDstackAD/CVD continuenote 20 / 31
CN301FTAnotePreference claims do not exemptnote 20 / note 31(a)
CN301CH98noteChapter 98 exempt except 9802.00.40/.50/.60/.80note 20 paragraphs / note 31(a)
CN301CN301noteFour-year-review products removed from note 20 lists (no double 25%); chassis and STS cranes stack with maritime 301 from 2026-11-10Rev.21 note 20 / 31 comparison; note 31(k)/(l)
S232BASEstackAdditive on full customs value; cap headings mean Column 1 + 232 = 15%/10% in totalnote 16 / 33 / 37 / 40 / 43 heading text
S232S232notePrecedence: semis > autos/MHDV > metals; auto/MHDV parts not subject to wood 232; wood and metals can stack; civil aircraft (GB/JP/TW) exempt from metals derivatives; pharma/UAS/polysilicon have no cross-232 exclusion232 overview table, "stacking" column; notes 16(m), 33, 38, 39
S232ADCVDstackAD/CVD continueThe 232 proclamations
S232FTAnotePreferences do not exempt; USMCA content-based headings for derivative steel and vehiclesnote 16(g); note 33(d); note 38
S232CH98tbdChapter 98 treatment varies by proclamation; not verified line by line (TBD_)— · TBD_
ADCVDBASEstackCash deposits (company-specific) in addition to all Chapter 99 duties; not drawback-eligible19 CFR 351; the relevant notes
Composition of the totalExpandCollapse
Column 1 general rate Free0%
Section 301 forced-labor tariff (12.5%) Conditional+12.5%
China 301 List 1 (9903.88.01) Applies+25%
232 steel / aluminum / copper & derivatives Conditional+25%
AD deposit (A570139, all-others) Conditional+165.14%
CVD deposit (C570140, all-others) Conditional+12.98%
Floor 25%: Section 301 forced-labor tariff (12.5%); 232 steel / aluminum / copper & derivativesif they hold

Data sources and disclaimer

HTSUS 2026 Rev.21 · 2026-10-25.12ExpandCollapse

Data sources

Tariff
HTSUS 2026 Rev.21
Data version
2026-10-25.12
AD/CVD
ACE case module + ITA dashboard

Disclaimer

Compiled from the HTSUS, the Federal Register, CBP CSMS messages and ACE reports as a classification and compliance reference, not legal advice; file according to current CBP/ACE guidance.