DutyDeskDutyDeskU.S. tariff desk · HTSUS Rev.21 · updated 2026-10-26
HSHS classificationDutyDuty lookupInfoResources
中文中文
Duty lookup
Data: HTSUS Rev.21 · 2026-10-25.12PrivacyAI-generated suggestion based on HTSUS text, not legal advice. Final classification rests with CBP rulings or licensed advice; the importer of record is responsible for the entry.

U.S. import duty lookup

Enter a 10-digit HTS line, the country of origin and the entry date to see the base rate, 301 / 232 / 201 / 338 additional duties, AD/CVD deposits, PGA flags and other requirements, with a confirmed total and a maximum.

Don't know the U.S. import tariff code? Classify a product →

The entry date decides which measures apply; earliest 2026-09-15

Entry claims (optional)
MPF and HMF amounts need the entered value and the transport mode.
Examples:Vacuum flasks / ChinaCotton T-shirts / Viet NamEV lithium batteries / KoreaAluminum profiles / MalaysiaPassenger car / JapanSteel plate / CanadaWhisky / CanadaCoffee / BrazilQuartz countertops / China
8708.99.2300
Other
Parts and accessories of the motor vehicles of headings 8701 to 8705: › Other parts and accessories: › Other: › Parts of tractors suitable for agricultural use:
Origin
CN · China
Entry date
2026-10-26
Unit
No.
Column 1 general
Free
Column 2
Free
SPI
—
HTS revision
2026 Rev.21
Print page
2986
Confirmed ad valorem total
50%
Column 1 general rate Free + additional 50%
Maximum (conditional + AD/CVD deposits)
142.84%
AD/CVD deposits +92.84%
AD/CVD cases
1
AD 92.84%(Same investigation)
How this was calculated
The maximum exposure includes AD/CVD cash deposits AD 92.84% (A570601). AD and CVD from the same investigation are added together. The all-others rate is shown; the actual rate follows the exporter or producer and each order's scope, and deposits are not final duties.

What to verify next

3Checks derived from this result; each item restates a measure, case or regulatory hit shown below.
  1. 1.AD/CVDAD/CVD: confirm whether the producer / exporter has its own rate and whether the goods fall within the scope of "A570601" (cases A570601)↗
  2. 2.RegulatoryWRO / Finding: Entity-level WRO: check whether the supplier / producer is 17 named prison-labor factories↗
  3. 3.RegulatoryBIS Connected Vehicle ICTS rule: Prohibits VCS software (from MY2027) and VCS hardware (from MY2030, or imports from 2029-01-01) linked to China / Russia.↗

Base rate

Column 1 / Column 2 / SPIFree
Column 1 General (MFN)Applies
Free
Basis: HTSUS 2026 Rev.21 chapters 1–97Verification: VERIFIED

Section 301 forced labor

1exempt
Section 301 forced-labor tariff (12.5%)9903.05.90Exempt
exempt

Goods entered under a 232 heading (MHDV) are exempt from the forced-labor 301 duty (note 52(f))

Basis: HTSUS Ch.99 U.S. note 52; 91 FR 47318Effective: 2026-07-24CSMS / source: CSMS #69326983Verification: VERIFIED

Section 301 China

1+25%
China 301 List 3 (9903.88.03)9903.88.03Applies
+25%

8-digit subheading 8708.99.23 is on L3

Basis: HTSUS Ch.99 note 20Effective: 2018-09-24Verification: VERIFIED

Section 232

2+25%
232 steel / aluminum / copper & derivatives9903.82.10 / .11Exempt
capped at 15%total cap incl. Column 1

General (all other countries) | Parts and accessories, nesoi, of tractors suitable for agricultural use | Not assessed when the same goods are entered under the automobile / heavy-vehicle / semiconductor 232 headings

  • Derivative: 232 applies only if the steel / aluminum / copper content is ≥15% by weight; below 15% enter under 9903.82.03 (0%), which is not a note 52(f) heading and so does not exempt the forced-labor 301 duty
  • Annex III interim list: Column 1 + 232 capped at 15% total (no 232 duty if Column 1 is already ≥15%), until 2027-12-31
  • The country of melt-and-pour (steel) / smelt-and-cast (aluminum) must be reported (note 16(d)/(i))
U.S.-melted content ≥85%: 10% → 10% · 9903.82.06Metal content <15% by weight: 0% (9903.82.03; the forced-labor 301 exemption is then not available) → 0% · 9903.82.03Aluminum articles containing Russian smelted or cast primary aluminum (any origin): 200% → 200% · 9903.85.67 / .68
Basis: Proclamation 11021 (2026-04-02) 91 FR 18201; Proclamation 11032 (2026-06-01) 91 FR 34085; Proclamation 11045 (2026-07-20) 91 FR 46635Effective: 2026-06-08Expires / changes: 2027-12-31; from 2028-01-01 back to Annex I-B 25% (9903.82.09)CSMS / source: CSMS 68253075 (2026-04-03); 68554727 (2026-05-06); 68855869 (2026-06-05); 69252300 (2026-07-15); 69711865 (2026-08-31)Verification: VERIFIED
232 medium/heavy-duty vehicles & parts9903.74.08Applies
+25%

General (all other countries) | Medium- and heavy-duty vehicle parts (Note 38(i) list)

Basis: Proclamation 10984 (2025-10-17) 90 FR 48451; offset procedure 91 FR 27914 (2026-05-15); engine offset FR Doc. 2026-15280 (2026-07-29)Effective: 2025-11-01Expires / changes: None (currently in force)CSMS / source: CSMS 66665333 (2025-11-03); 68559236 (2026-05-06 USMCA); 69087399 (2026-06-29 offset)Verification: VERIFIED

AD/CVD

1
AD/CVD: 1 order in placeConditional
—

Cash deposits follow the company-specific rate (ACE case module). Coverage depends on each order's scope. The table below lists case numbers, status and the all-others rate. The all-others deposit rate is counted in the maximum exposure, not in the confirmed total.

Basis: ACE REF-202/207/208 (2026-09-11); FR noticesVerification: VERIFIED (case existence) / check scope and rates case by case
CaseTypeProductStatusAll-others rateDeposit statusDetermination
Same investigation: A570601 · AD 92.84% counted in the maximum
A570601
Matched on 8708.99.2300
AD
Tapered Roller Bearings and Parts Thereof
Order in place92.84%Deposits in effect
91 FR 32937 (2026-06-02) review opportunity
ACE rate eff. 2009-01-22

PGA filing flags

0 flagsExpandCollapse

No ACE PGA flag on this line (requirements without a flag, such as FCC, DOE, SIMA and marking, still apply).

Fees

MPF 0.3464% · HMF 0.125%ExpandCollapse

no entered value: rates and limits only

MPF 0.3464% (min $34.58 / max $670.86)—
HMF 0.125% (ocean only)not ocean

Period 2026-10-01 – 2027-09-30 · 91 FR 48398 (2026-07-31, Doc. 2026-15530, FY2027)

Other import requirements

2

Supply chain / forced labor (UFLPA · WRO · CAATSA)

Chinese origin: the UFLPA presumption is triggered through the supply chain (Xinjiang inputs / Entity List), not by country of origin; the origins with the most CBP denials are MY / VN / TH.

WRO · China: Prison-labor products (tea; artificial flowers; rubber accelerators; rubber gloves/condoms/raincoats/footwear; hoists; asbestos; fans/zinc-coated wire; sulfuric acid; drilling machines; auto parts; cast iron; sheepskin/leather; galvanized pipe; presses; diesel engines; planing machines)8708Conditional
1991–1995

17 named prison-labor factories | Entity-level WRO: check whether the supplier / producer is 17 named prison-labor factories | status: active

CSMS / source: CBP WRO listHTS mapping confidence: L

Requirements without an ACE flag

BIS Connected Vehicle ICTS ruleBISConditional
before-entry

Prohibits VCS software (from MY2027) and VCS hardware (from MY2030, or imports from 2029-01-01) linked to China / Russia. VCS hardware importers and vehicle manufacturers must file a Declaration of Conformity ≥60 days before the first import / sale.

2025–26: GA1 revised and GA3 added 2026-06-18

Basis: 15 CFR 791 Subpart D (effective 2025-03-17)Scope: 8708.99 (Determined by product attributes (the HTS code is only a hint))Exemptions: GA1 / GA3 (Approved Supplier Registry added 2026-06-18)CSMS / source: eCFR 15 CFR 791 Subpart DVerification: H
General requirements (all goods) (4)
  • Country-of-origin marking (CBP, 19 U.S.C. 1304; 19 CFR 134): Mark the country of origin legibly and permanently in English before release. J-list articles (§134.33) may be marked on the container. Special methods (§134.43: knives, scissors, surgical / scientific instruments, pliers and vacuum bottles must be die-stamped, etched or engraved). Pipe 7304–7307, gas cylinders 7311 and manhole covers 7325 under 1304(c)–(e). Watches and clocks per chapter 91 additional U.S. note 4. Hong Kong goods marked "China" (EO 13936; the origin code stays HK). eCFR 19 CFR 134; CBP HK FAQ
  • Wood packaging material (ISPM 15) (APHIS/CBP, 7 CFR 319.40-3): Wood pallets / crates for all goods must be heat-treated or fumigated and bear the IPPC mark; otherwise immediate re-export and penalties eCFR 7 CFR 319.40-3
  • Importer Security Filing (10+2) (CBP, 19 CFR 149): File the 10 data elements 24 hours before vessel loading (5 elements for FROB / IE / T&E); violations: $5,000 liquidated damages per shipment eCFR 19 CFR 149
  • FTC Made in USA Labeling Rule (FTC, 16 CFR 323): Unqualified "Made in USA" claims only when all or virtually all of the product is made in the U.S.; civil penalties FTC rule; EO 14392
Stacking rules that apply here 18ExpandCollapse
ABRelationRuleBasis
FL301BASEstackAdditive to Column 1; EU/TW net-of-MFN to 10%, JP/KR/CH to 12.5%HTSUS Rev.21 note 52(a), 52(k)
FL301CN301stackStacks with China 301note 52(a)
FL301S232exempt_bGoods entered under the listed 232 headings are exempt from FL-301 (9903.05.90); UAS 232 and polysilicon 232 are not in note 52(f) → FL-301 still applies (TBD_)note 52(f)(1)–(8); Sec232_Carveout table
FL301ADCVDstackAD/CVD continue to applynote 52(a)
FL301FTAnotePreference claims do not exempt, except USMCA duty-free (9903.05.93/.94) and CAFTA-DR textiles (9903.05.95)note 52(a), (g)–(i)
FL301CH98noteChapter 98 exempt except 9802.00.40/.50/.60 (value of repairs) and 9802.00.80 (value less U.S. content)note 52(a)
CN301BASEstackAdditive to Column 1note 20(a)/(c)/(e)/(g)/(r); note 31(a)
CN301S232stackStacks: neither 301 nor 232 exempts the other for Chinanote 20 / 31; the 232 proclamations
CN301ADCVDstackAD/CVD continuenote 20 / 31
CN301FTAnotePreference claims do not exemptnote 20 / note 31(a)
CN301CH98noteChapter 98 exempt except 9802.00.40/.50/.60/.80note 20 paragraphs / note 31(a)
CN301CN301noteFour-year-review products removed from note 20 lists (no double 25%); chassis and STS cranes stack with maritime 301 from 2026-11-10Rev.21 note 20 / 31 comparison; note 31(k)/(l)
S232BASEstackAdditive on full customs value; cap headings mean Column 1 + 232 = 15%/10% in totalnote 16 / 33 / 37 / 40 / 43 heading text
S232S232notePrecedence: semis > autos/MHDV > metals; auto/MHDV parts not subject to wood 232; wood and metals can stack; civil aircraft (GB/JP/TW) exempt from metals derivatives; pharma/UAS/polysilicon have no cross-232 exclusion232 overview table, "stacking" column; notes 16(m), 33, 38, 39
S232ADCVDstackAD/CVD continueThe 232 proclamations
S232FTAnotePreferences do not exempt; USMCA content-based headings for derivative steel and vehiclesnote 16(g); note 33(d); note 38
S232CH98tbdChapter 98 treatment varies by proclamation; not verified line by line (TBD_)— · TBD_
ADCVDBASEstackCash deposits (company-specific) in addition to all Chapter 99 duties; not drawback-eligible19 CFR 351; the relevant notes
Composition of the totalExpandCollapse
Column 1 general rate Free0%
China 301 List 3 (9903.88.03) Applies+25%
232 medium/heavy-duty vehicles & parts Applies+25%
AD deposit (A570601, all-others) Conditional+92.84%

Data sources and disclaimer

HTSUS 2026 Rev.21 · 2026-10-25.12ExpandCollapse

Data sources

Tariff
HTSUS 2026 Rev.21
Data version
2026-10-25.12
AD/CVD
ACE case module + ITA dashboard

Disclaimer

Compiled from the HTSUS, the Federal Register, CBP CSMS messages and ACE reports as a classification and compliance reference, not legal advice; file according to current CBP/ACE guidance.