DutyDeskDutyDeskU.S. tariff desk · HTSUS Rev.21 · updated 2026-10-26
HSHS classificationDutyDuty lookupInfoResources
中文中文
Duty lookup
Data: HTSUS Rev.21 · 2026-10-25.12PrivacyAI-generated suggestion based on HTSUS text, not legal advice. Final classification rests with CBP rulings or licensed advice; the importer of record is responsible for the entry.

U.S. import duty lookup

Enter a 10-digit HTS line, the country of origin and the entry date to see the base rate, 301 / 232 / 201 / 338 additional duties, AD/CVD deposits, PGA flags and other requirements, with a confirmed total and a maximum.

Don't know the U.S. import tariff code? Classify a product →

The entry date decides which measures apply; earliest 2026-09-15

Entry claims (optional)
MPF and HMF amounts need the entered value and the transport mode.
Examples:Vacuum flasks / ChinaCotton T-shirts / Viet NamEV lithium batteries / KoreaAluminum profiles / MalaysiaPassenger car / JapanSteel plate / CanadaWhisky / CanadaCoffee / BrazilQuartz countertops / China
7311.00.0090
Other
Containers for compressed or liquefied gas, of iron or steel
Origin
CN · China
Entry date
2026-10-26
Unit
No. kg
Column 1 general
Free
Column 2
25%
SPI
—
HTS revision
2026 Rev.21
Print page
2616
Confirmed ad valorem total
75%
Column 1 general rate Free + additional 75%
Maximum (conditional + AD/CVD deposits)
197.95%
AD/CVD deposits +122.95%
AD/CVD cases
4
AD 101.67% + CVD 21.28%(Same investigation;all-others rate; highest of 2 families)
How this was calculated
The maximum exposure includes AD/CVD cash deposits AD 101.67% (A570126) + CVD 21.28% (C570127). AD and CVD from the same investigation are added together. The 2 case families cover mutually exclusive goods, so the family with the highest total is used. The all-others rate is shown; the actual rate follows the exporter or producer and each order's scope, and deposits are not final duties.

What to verify next

5Checks derived from this result; each item restates a measure, case or regulatory hit shown below.
  1. 1.AD/CVDAD/CVD: confirm whether the producer / exporter has its own rate and whether the goods fall within the scope of "A570126 / C570127" (cases A570126 / C570127)↗
  2. 2.AD/CVDAD/CVD: confirm whether the producer / exporter has its own rate and whether the goods fall within the scope of "A570086 / C570087" (cases A570086 / C570087)↗
  3. 3.RegulatoryUFLPA high-priority sector (Steel): prepare supply-chain tracing and confirm no listed-entity content→
  4. 4.RegulatorySection 232 melt-and-pour / smelt-and-cast reporting: Steel: report the melt-and-pour country ISO code in the ACE Importer's Additional Declaration Type 08 (since 2024-11-21) and upload the mil…↗
  5. 5.RegulatorySpecial marking methods: Permanent methods such as die-stamping, casting, etching, engraving or continuous paint stenciling;↗

Base rate

Column 1 / Column 2 / SPIFree
Column 1 General (MFN)Applies
Free
Basis: HTSUS 2026 Rev.21 chapters 1–97Verification: VERIFIED

Section 301 forced labor

1exempt
Section 301 forced-labor tariff (12.5%)9903.05.90Exempt
exempt

Goods entered under a 232 heading (METALS) are exempt from the forced-labor 301 duty (note 52(f))

Basis: HTSUS Ch.99 U.S. note 52; 91 FR 47318Effective: 2026-07-24CSMS / source: CSMS #69326983Verification: VERIFIED

Section 301 China

1+25%
China 301 List 3 (9903.88.03)9903.88.03Applies
+25%

8-digit subheading 7311.00.00 is on L3

Basis: HTSUS Ch.99 note 20Effective: 2018-09-24Verification: VERIFIED

Section 232

1+50%
232 steel / aluminum / copper & derivatives9903.82.02Applies
+50%

General (all other countries) | Iron or steel, containers for compressed or liquefied gas

  • The country of melt-and-pour (steel) / smelt-and-cast (aluminum) must be reported (note 16(d)/(i))
Aluminum articles containing Russian smelted or cast primary aluminum (any origin): 200% → 200% · 9903.85.67 / .68
Basis: Proclamation 11021 (2026-04-02) 91 FR 18201; Proclamation 11032 (2026-06-01) 91 FR 34085; Proclamation 11045 (2026-07-20) 91 FR 46635Effective: 2026-04-06Expires / changes: None (currently in force)CSMS / source: CSMS 68253075 (2026-04-03); 68554727 (2026-05-06); 68855869 (2026-06-05); 69252300 (2026-07-15); 69711865 (2026-08-31)Verification: VERIFIED

AD/CVD

1
AD/CVD: 4 orders in placeConditional
—

Cash deposits follow the company-specific rate (ACE case module). Coverage depends on each order's scope. The table below lists case numbers, status and the all-others rate. The all-others deposit rate is counted in the maximum exposure, not in the confirmed total.

Basis: ACE REF-202/207/208 (2026-09-11); FR noticesVerification: VERIFIED (case existence) / check scope and rates case by case
CaseTypeProductStatusAll-others rateDeposit statusDetermination
Same investigation: A570126 / C570127 · AD 101.67% + CVD 21.28% = 122.95% counted in the maximum
A570126
Matched on 7311.00.0090
AD
Certain Non-Refillable Steel Cylinders
Order in place101.67%Deposits in effect
91 FR 23956 (2026-05-04) review opportunity
ACE rate eff. 2021-05-11
C570127
Matched on 7311.00.0090
CVD
Certain Non Refillable Steel Cylinders
Order in place21.28%Deposits in effect
91 FR 23956 (2026-05-04) review opportunity
ACE rate eff. 2021-05-11
Same investigation: A570086 / C570087 · AD 76.83% + CVD 37.91% = 114.74%
A570086
Matched on 7311.00.0090
AD
Steel Propane Cylinders
Order in place76.83%Deposits in effect
91 FR 49412 (2026-08-04) review opportunity
ACE rate eff. 2019-08-09
C570087
Matched on 7311.00.0090
CVD
Steel Propane Cylinders
Order in place37.91%Deposits in effect
91 FR 49412 (2026-08-04) review opportunity
ACE rate eff. 2019-08-09

PGA filing flags

FDA FD1NHTSA DT1ExpandCollapse
FDA FD1NHTSA DT1
  • FD1 FDA data may be required 801(a)
  • DT1 DOT/National Highway Traffic Safety Administration HS-7 data may be required

may-be-required only · ACE valid to 2039-12-31

Fees

MPF 0.3464% · HMF 0.125%ExpandCollapse

no entered value: rates and limits only

MPF 0.3464% (min $34.58 / max $670.86)—
HMF 0.125% (ocean only)not ocean

Period 2026-10-01 – 2027-09-30 · 91 FR 48398 (2026-07-31, Doc. 2026-15530, FY2027)

Other import requirements

4

Supply chain / forced labor (UFLPA · WRO · CAATSA)

Chinese origin: the UFLPA presumption is triggered through the supply chain (Xinjiang inputs / Entity List), not by country of origin; the origins with the most CBP denials are MY / VN / TH.

UFLPA priority sector: Steel73Applies
since 2025-08-19

Chinese origin + priority sector: prepare applicability-review / exception-request documentation | Bayi Iron & Steel listed under section (ii); trace steel products back to the mill

Basis: FLETF 2025 Strategy UpdateVerification: VERIFIED
Traceability document checklist (6)
Applicability review (App. E) — supply chain as a whole
  • Supply-chain description incl. all stages
  • roles of each entity (incl. shippers/exporters)
  • related-party disclosure per 19 CFR 152.102(g)
  • supplier list per production step with contact details
  • affidavits from each entity
CBP Pub. 5560-0526 (2026-06-09) App. E p.56
Applicability review (App. E) — goods and components
  • Purchase orders
  • invoices for all suppliers and sub-suppliers
  • packing list
  • bill of materials
  • certificates of origin
  • payment records
  • seller's inventory records incl. dock/warehouse receipts
  • shipping records incl. manifests and bills of lading
  • buyer's inventory records
  • import/export records
CBP Pub. 5560-0526 App. E p.56
Applicability review (App. E) — miner / producer / manufacturer
  • Same evidence for raw materials
  • mining/production records (traceability, production orders, capacity reports, site-visit reports, input-output volume match)
  • other evidence — audits must be unannounced third-party audits against the ILO 11 indicators
  • financial/environmental audits not considered sufficient
CBP Pub. 5560-0526 App. E p.57
Exception request (App. F)
  • Due-diligence system (supplier engagement; mapping and risk assessment; code of conduct addressing PRC government labor schemes; training; monitoring; remediation/termination; independent verification; public reporting)
  • supply-chain management measures
  • evidence for China-origin goods (supply-chain map; wage and per-worker output data; recruitment controls; credible ILO-indicator audits)
CBP Pub. 5560-0526 App. F pp.58–59
Procedure and deadlines
  • Applicability review vs exception request
  • UFLPA/CAATSA: 30 days via Forced Labor Portal, max two extensions totalling ≤90 calendar days
  • WRO: three months
  • protest within 180 days of exclusion
  • BCI in double brackets
  • translations required
CBP Pub. 5560-0526 pp.9–11, 20–24, 30
Steel (App. A)
  • Flowcharts by company
  • certificates of origin or affidavits naming entity and location for mining processing BF/BOF/EAF refining continuous casting reheating hot rolling and long/flat products
  • downstream processing
  • raw-material invoices POs payment production and export records
  • location of further manufacture
  • bills of lading tracing inputs through export to the U.S.
CBP Pub. 5560-0526 App. A pp.44–45

Requirements without an ACE flag

Section 232 melt-and-pour / smelt-and-cast reportingCBPApplies
at-entry

Steel: report the melt-and-pour country ISO code in the ACE Importer's Additional Declaration Type 08 (since 2024-11-21) and upload the mill certificate via DIS. Aluminum: smelt / cast country fields. The "unknown" option is charged at the higher rate.

2025–26: "Unknown" option available since 2025-06-28

Basis: Proc. 9704/9705 and successors; CSMS #62582900 / #65493457Scope: 232 metals (This line is on the 232 steel / aluminum / copper list)Exemptions: Not applicable to HTS codes outside Section 232CSMS / source: CSMS #62582900; #65493457Verification: H
Special marking methodsCBPApplies
before-release

Permanent methods such as die-stamping, casting, etching, engraving or continuous paint stenciling; watch movements, cases and dials marked separately

Basis: 19 U.S.C. 1304(c)–(e); 19 CFR 134.43; Ch.91 Add'l U.S. Note 4Scope: 7311 (Applies by HTS code)CSMS / source: eCFR 19 CFR 134.43Verification: H (chapter 91 note text TBD_ to verify)
NHTSA HS-7 declarationNHTSAInfo
at-entry

Enter the HS-7 box code at entry; non-conforming vehicles require a registered importer and a DOT bond

Basis: 49 U.S.C. 30112; 49 CFR 591Scope: DT1/DT2 (ACE flag present — see the PGA panel)CSMS / source: eCFR 49 CFR 591.5Verification: H
General requirements (all goods) (4)
  • Country-of-origin marking (CBP, 19 U.S.C. 1304; 19 CFR 134): Mark the country of origin legibly and permanently in English before release. J-list articles (§134.33) may be marked on the container. Special methods (§134.43: knives, scissors, surgical / scientific instruments, pliers and vacuum bottles must be die-stamped, etched or engraved). Pipe 7304–7307, gas cylinders 7311 and manhole covers 7325 under 1304(c)–(e). Watches and clocks per chapter 91 additional U.S. note 4. Hong Kong goods marked "China" (EO 13936; the origin code stays HK). eCFR 19 CFR 134; CBP HK FAQ
  • Wood packaging material (ISPM 15) (APHIS/CBP, 7 CFR 319.40-3): Wood pallets / crates for all goods must be heat-treated or fumigated and bear the IPPC mark; otherwise immediate re-export and penalties eCFR 7 CFR 319.40-3
  • Importer Security Filing (10+2) (CBP, 19 CFR 149): File the 10 data elements 24 hours before vessel loading (5 elements for FROB / IE / T&E); violations: $5,000 liquidated damages per shipment eCFR 19 CFR 149
  • FTC Made in USA Labeling Rule (FTC, 16 CFR 323): Unqualified "Made in USA" claims only when all or virtually all of the product is made in the U.S.; civil penalties FTC rule; EO 14392

PGA flags: what to prepare

FDA · FOO FD1/FD2/FD3/FD4 — Food (including animal food), dietary supplements, beverages (including alcohol)

Before arrival: Foreign facility registration (FEI / registration number); designate the FSVP importer (name + DUNS); submit and confirm Prior Notice in advance (road 2 hours / air and rail 4 hours / ocean 8 hours)

At entry: FDA / FOO message set: product code, manufacturer, shipper, grower, country of production, FSVP importer DUNS, AofC codes; PN confirmation number

Disclaim: FD1 / FD3: only code A (B rejected since 2020-04-18); FD2 / FD4 cannot be disclaimed

If missing: Missing PN → refusal under 801(m) / hold at port; missing 801(a) data → entry rejected / FDA hold

2025–26: PN final rule effective 2025-10-27 (resubmit within 10 days after refusal; mail tracking number from 2026-10-01); FSMA 204 traceability compliance postponed to 2028-07-20; Supplemental Guide v2.5.13 (2025-09)

https://www.fda.gov/industry/import-basics/harmonized-tariff-schedule-and-fd-flags · Verification H

FDA · DRU FD1/FD2 — Human drugs, APIs, OTC

Before arrival: Drug establishment registration and listing (NDC), NDA / ANDA; importer FEI / DUNS

At entry: FDA / DRU message set: product code, manufacturer, FDA importer, intended-use code (required), DA / DLS / REG AofC

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / FDA hold

https://www.fda.gov/media/186046/download · Verification H

FDA · DEV FD1/FD2 — Medical devices, IVDs

Before arrival: Establishment registration and device listing; 510(k) / PMA number; initial importer registration

At entry: DEV / DFE / LST AofC required; PM# (510(k) / PMA); intended-use code

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

FDA · BIO FD1/FD2 — Vaccines, blood products, HCT/Ps, allergenics

Before arrival: BLN / STN license, establishment registration, HCT/P registration

At entry: BIO message set: BLN/STN, REG, IND, HCT/HRN AofC

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

FDA · COS FD1/FD2 — Cosmetics

Before arrival: MoCRA facility registration / product listing (FEI)

At entry: Product code, manufacturer, FDA importer, country of production

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

FDA · RAD FD1/FD2 — Radiation-emitting electronic products such as lasers, X-ray, microwave and displays

Before arrival: Product report / accession number; FDA 2877 declaration code

At entry: RA1–RA7 / RB / RC / RD AofC; product name

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

FDA · TOB FD1/FD2 — Cigarettes, e-cigarettes, cigars

Before arrival: Manufacturer registration / listing; marketing authorization (PMTA / SE) status

At entry: Product name, intended-use code; PMT / SE / EXE AofC

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

FDA · VME FD1/FD2 — Veterinary drugs, veterinary devices, medicated feed

Before arrival: NADA / ANADA, drug listing (NDC), establishment registration

At entry: VME message set: NDC, REG, VAN/VNA AofC

Disclaim: FD1: only code A; FD2 cannot be disclaimed

If missing: Entry rejected / hold

https://www.fda.gov/media/186046/download · Verification H

NHTSA · MVS DT1/DT2 — On-road motor vehicles

Before arrival: Determine the HS-7 box (1 conforming, 2A / 2B, 3 non-conforming via registered importer + DOT bond, 4–13 exemptions / temporary); RI number

At entry: NHTSA message set: HS-7 box, VIN, make / model, RI number and bond (box 3 / 13)

Disclaim: DT1: only A (program OFF); DT2 cannot be disclaimed

If missing: Refused admission; false declarations up to $10k / 5 years

2025–26: None (IG 2023-01-23)

https://www.nhtsa.gov/document/implementation-guide-pga-message-set-shipments-subject-nhtsa-regulations · Verification H

NHTSA · REI/TPE/OEI DT1/DT2 — Tires, glazing, lamps, seats, child restraints (REI); theft-marked parts (TPE); other equipment (OEI)

Before arrival: Manufacturer registration; DOT marking; HS-7 box 2A / 2B

At entry: HS-7 box + manufacturer / brand (required for the 13 FMVSS equipment items)

Disclaim: Same as MVS

If missing: Refusal

https://www.nhtsa.gov/document/implementation-guide-pga-message-set-shipments-subject-nhtsa-regulations · Verification H

NHTSA · OFF DT1 — Goods under flagged HTS codes that are outside NHTSA jurisdiction

Before arrival: —

At entry: disclaim A + program OFF

Disclaim: Only A

If missing: —

2025–26: —

https://www.nhtsa.gov/document/implementation-guide-pga-message-set-shipments-subject-nhtsa-regulations · Verification H

Stacking rules that apply here 18ExpandCollapse
ABRelationRuleBasis
FL301BASEstackAdditive to Column 1; EU/TW net-of-MFN to 10%, JP/KR/CH to 12.5%HTSUS Rev.21 note 52(a), 52(k)
FL301CN301stackStacks with China 301note 52(a)
FL301S232exempt_bGoods entered under the listed 232 headings are exempt from FL-301 (9903.05.90); UAS 232 and polysilicon 232 are not in note 52(f) → FL-301 still applies (TBD_)note 52(f)(1)–(8); Sec232_Carveout table
FL301ADCVDstackAD/CVD continue to applynote 52(a)
FL301FTAnotePreference claims do not exempt, except USMCA duty-free (9903.05.93/.94) and CAFTA-DR textiles (9903.05.95)note 52(a), (g)–(i)
FL301CH98noteChapter 98 exempt except 9802.00.40/.50/.60 (value of repairs) and 9802.00.80 (value less U.S. content)note 52(a)
CN301BASEstackAdditive to Column 1note 20(a)/(c)/(e)/(g)/(r); note 31(a)
CN301S232stackStacks: neither 301 nor 232 exempts the other for Chinanote 20 / 31; the 232 proclamations
CN301ADCVDstackAD/CVD continuenote 20 / 31
CN301FTAnotePreference claims do not exemptnote 20 / note 31(a)
CN301CH98noteChapter 98 exempt except 9802.00.40/.50/.60/.80note 20 paragraphs / note 31(a)
CN301CN301noteFour-year-review products removed from note 20 lists (no double 25%); chassis and STS cranes stack with maritime 301 from 2026-11-10Rev.21 note 20 / 31 comparison; note 31(k)/(l)
S232BASEstackAdditive on full customs value; cap headings mean Column 1 + 232 = 15%/10% in totalnote 16 / 33 / 37 / 40 / 43 heading text
S232S232notePrecedence: semis > autos/MHDV > metals; auto/MHDV parts not subject to wood 232; wood and metals can stack; civil aircraft (GB/JP/TW) exempt from metals derivatives; pharma/UAS/polysilicon have no cross-232 exclusion232 overview table, "stacking" column; notes 16(m), 33, 38, 39
S232ADCVDstackAD/CVD continueThe 232 proclamations
S232FTAnotePreferences do not exempt; USMCA content-based headings for derivative steel and vehiclesnote 16(g); note 33(d); note 38
S232CH98tbdChapter 98 treatment varies by proclamation; not verified line by line (TBD_)— · TBD_
ADCVDBASEstackCash deposits (company-specific) in addition to all Chapter 99 duties; not drawback-eligible19 CFR 351; the relevant notes
Composition of the totalExpandCollapse
Column 1 general rate Free0%
China 301 List 3 (9903.88.03) Applies+25%
232 steel / aluminum / copper & derivatives Applies+50%
AD deposit (A570126, all-others) Conditional+101.67%
CVD deposit (C570127, all-others) Conditional+21.28%

Data sources and disclaimer

HTSUS 2026 Rev.21 · 2026-10-25.12ExpandCollapse

Data sources

Tariff
HTSUS 2026 Rev.21
Data version
2026-10-25.12
AD/CVD
ACE case module + ITA dashboard

Disclaimer

Compiled from the HTSUS, the Federal Register, CBP CSMS messages and ACE reports as a classification and compliance reference, not legal advice; file according to current CBP/ACE guidance.